Tom invested £2,685 in November 2023 to get it running and driving, with the following work being carried out:
- Rebuild both Zenith carburettors using rebuild kits from Burlen.
- Remove, clean and gap sparkplugs.
- Carry out compression test. The engine is worn but all cylinders read between 110 psi and 140 psi, so it is “still perfectly usable” in the garage’s opinion.
- Replace points and condenser.
- Fire up and test, engine runs and revs sweetly now.
- Adjust ignition timing and set mixture whilst running.
- Fabricate new throttle rod with two new rose joints and install.
- Remove engine bay wiring harness and carry out repairs as required. Reinsulate and reinstall.
- Replace starter motor and fit a new choke cable.
Cotswold Classic Car Restorations reported that the “car now drives fine around the yard.” It certainly drove onto and off the trailer that brought it here.
Having read the Sheer Rover’s history, it won’t surprise you to hear that Tom is a bit of a romantic and spent another £375 with them to get a report to establish what it would need to get an MoT.
The report, which can be seen online, reads as follows:
1. Rear license plate light not working – wiring/bulb?
2. Nearside indicators not working – wiring.
3. Hazard lights nearside not working – wiring.
4. Rear wash/wipe not working – wiring/motor?
5. Front wipers very poor – new blades/motor?
6. Nearside front washer not working – pipes/motor?
7. Front windscreen has a large crack on the driver’s side.
8. Horn is weak.
9. Offside dip beam not working – bulb/wiring?
10. Offside front steering arm gaiter is split.
11. Both front brake discs are pitted.
12. Steering damper bushes need replacement.
13. All four tyres are old and cracked.
14. Both rear discs are pitted.
15. Body to chassis mounts (front) are badly corroded and holed – needs welding.
16. Emissions.
Its summary: “Based on the above the car would not pass an MoT should it be inspected as is, the required works involve welding, electrical repairs to lighting wiring and new brake discs and pads.”
Now you know as much as the seller does – and isn’t it heartening that he paid for an independent, third-party assessment? Tom’s keen for the Sheer Rover to go to an enthusiast to be restored and has done everything he can to be as transparent, helpful, and honest as possible. We always say the best cars come from good people, and this certainly seems to be the case here…
The engine bay is scruffy with oil leaks and some surface corrosion but given you’re going to restore the whole car anyway, this really isn’t too much of a concern, is it?
As for the chassis, it looks surprisingly solid and may well need nothing more than some tidying up following that older work to it.
There is bound to be some mechanical work to do to replace bushes and the like, but the main structure looks good.