We get to see quite a number of early Land Rovers here at our Abingdon HQ.
We’ve seen slightly sorry looking ones, average ones, good ones, very good ones and outstanding ones.
This one, however, is a class above anything we’ve seen before and it comes with absolutely gold-plated ownership and restoration provenance.
First things first.
It is a Series 1 80-inch Land Rover, manufactured in 1951 for the 1952 model year.
It was delivered new to Botwoods in Ipswich and the original registration number it still wears today is correct to that year and area. It has had its original 2-litre engine swapped in the late 1960's, as is often the case, for the far smoother and more powerful 2.25 litre petrol engine.
Now then. We need to tell you about the vendor.
He was a long-term employee of Jaguar Land Rover for many years and left the company in 2019, when he held the role of General Manager of the Classic Division restoring among others, Series 1 Land Rovers.
It is he who bought the vehicle (which was already in very decent nick, apparently) in 2015, and he who then decided to dedicate huge amounts of money, time and readily available expertise and advice (the JLR Classic team were pretty much on speed-dial) to the task of restoring this car as expertly as possible and with a truly forensic focus on optimising authenticity and originality wherever possible.
The chassis is original. The bulkhead is the original and very rare aluminium type. The body panels are original.
We know that the body panels are original because the vendor found the original yellow primer as the car was being media-blasted back to bare ‘Birmabright’ (no, it’s not just aluminium) during the restoration.
All the galvanised parts were re-galvanised during the restoration (of which there is comprehensive photographic evidence, incidentally).
The period-correct yellow primer and ‘Bronze Green’ paint it wears today are from the Leamington Spa firm who supply JLR Classic with their paints.
Many bolts have been given the period-correct ‘Sheradising’ treatment which involves heating the steel parts up to 500 °C in a closed rotating drum containing metallic zinc dust until the zinc evaporates and diffuses into the steel substrate forming diffusion bonded Zn-Fe-phases.
But, of course, you knew that.
Take a long hard look at the door panels. There are different rivets, in different places, doing subtly different jobs. That’s how it was when it left the factory, and that’s how it is again today.
Everything that needed refurbishing or replacing has been refurbished or replaced as appropriate without compromising authenticity.
Check out the hoops on the bonnet lid. They’re there so you can rest the bonnet on the windscreen when you’re having a tinker with the engine. Look closely and you’ll see that the (correct) soft pads have been (correctly) rivetted to the (correct) hoops in order to prevent scratching the windscreen.
That level of detail can be seen wherever you look, from the new hood and new seats to the period-correct tyres.
The vendor tells us that this restoration cost him somewhere north of £45,000, at which point he very sensibly stopped counting.
The car has been off the road for the duration of the restoration, which started in 2015 and finished in 2023.
It is now ready to dazzle, amaze and thrill everyone who sees it during the next phase of its long life.